We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Braktec / AJP - Rear Master Cylinder 11mm - Beta 50/80, GasGas Contact
£109.95
1 in stock
Part Number
AJP_130.00.000C
Original rear brake master cylinder as mounted on the kid's Beta Rev Evo 50/80 and the older Gas Gas trials bikes.
For use with Dot 4 brake fluid
Bolt hole centres: 40mm
11mm piston kit
Also fits:
Beta 50, Rev80, Evo80, Junior 2003 to 2013
GasGas Contact, JT, JTR, JTX, TX, TXT and Edition 1992 to 2001 (plus the later edition models) replaces the Brembo version
Fantic Key-Roo
Macal Minarelli TROFEO-50
Reiju RS1-50
Yamaha DT-50R
Derbi GPR-50, GPR-75>'97
For use with Dot 4 brake fluid
Bolt hole centres: 40mm
11mm piston kit
Also fits:
Beta 50, Rev80, Evo80, Junior 2003 to 2013
GasGas Contact, JT, JTR, JTX, TX, TXT and Edition 1992 to 2001 (plus the later edition models) replaces the Brembo version
Fantic Key-Roo
Macal Minarelli TROFEO-50
Reiju RS1-50
Yamaha DT-50R
Derbi GPR-50, GPR-75>'97
Possibly can also be used as a replacement for the discontinued Montesa Cota 315R rear brake master cylinder as found on the early 1997 to 2000 models. The body of this master cylinder is slightly bigger where the reservoir hose connects so the cylinder needs spacing off from the frame to allow it to fit, the original came with captive nuts but there isn't enough material to fit these so you'll need to use longer bolts and nuts. Finally the pushrod on the brake lever requires shortening, so it's not ideal but it's the best option we found so far.
Manufacturer | AJP |
---|---|
Beta Part Code | 002591182000, 25-91182 |
GasGas Part Code | R350100 |
Write Your Own Review
We found other products you might like!