SKF Fork Seal Kit (1 Leg) - Oil & Dust Seals - Marzocchi 40mm
Fork seal kit suitable for Marzocchi 40mm forks
Fits the GasGas Pro 2004 on, Scorpa SY250 2008 on, Sherco 2011 SSDT and Ossa trials bikes.
1 x Fork Oil Seal
1 x Dust Wiper Seal
Suitable for 1 fork leg, you will need 2 kits to service a complete set of forks.
These are a suitable replacement seal for the Ducati 750 Sport MY 1988
The original Marzocchi dust seal (now unavailable) had this marking on the seal.
T3C5X7 40 52.5/56.5 4.6/14 8585
40 Internal diameter
52.5 external by 4.6mm deep (where it fit's inside the leg)
56.5mm external by 14mm height (overall dimensions)
The oil seal is the following dimensions:
Inner Diameter: 40mm
Outer Diameter: 52.2mm
Outer Height: 10mm
Inner Height: 10.5mm
Laboratory tests verified that SKF fork seals reduce friction by more than 20% and keeping it constant during the operation. Stick-slip was also reduced when compared to standard seals. Diagrams 1 and 2 show the load distribution over the stroke of the fork (spikes represent vibrations) and the value of the friction generated by the seals during operation (force) both in the case of chrome plated and hard coated rod. In field tests, riders experienced a much smoother feeling that results in better accuracy and more comfort.
The sealing system for the ultimate riding experience
The oil and wiper seals have been specially designed to provide the following benefits:
- compatible with a wide range of original equipment and aftermarket oils
- increase seal life and performance
- enhance water and dirt protection capability and withstand UV light
- maintain low and constant friction in operation
- reduce wear and air suction.
| Manufacturer | SKF |
|---|---|
| Sherco Part Code | 3541 |
| GasGas Part Code | BT280414212, BT280414131, BT20000143011, BT20000153011, B4P17914212, BEP250214212 |
| Scorpa Part Code | S10D-70111-00-00 |
-
Splat - Marzocchi Fork Bush KitStarting at £9.95
-
Putoline HPX R Fork Oil (2.5W, 5W, 7.5W, 10W)Starting at £13.99