We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
O-ring 11.5x1.5 Viton - Clutch Slave Cylinder - GasGas Pro / EM / Vertigo
£0.70
18 in stock
Part Number
11.5X1.5V75
Oring for the GasGas TXT Pro, the Electric Motion Epure Race & Comp, plus the Vertigo trials bike clutch slave cylinder for use with Mineral Oil Only
The 2 O-rings fit on the boss protruding from the clutch case cover.
Sold individually, two (usually) required per bike.
The o ring roughly 11.5 x 14.5 x 1.5 mm made from Viton
Fitting: Always clean everything before fitting, with no oil contaminants on the parts. (Use brake cleaner or isopropyl alcohol on the metal parts, blow dry to absolute clean. Drain or disconnect the hydraulic hose from the cover so fluid doesn’t enter while you work.)
Use "sparingly" only silicone grease to lubricate parts for assembly.
Clean hands, do not contaminate the o-rings with fluids or cleaners.
Mineral oil, Dot 4 and Gear oil do not mix and cross contamination can cause seals to swell, even oil on your hands can contaminate the o-rings during assembly, this is why it is very important to keep everything so clean.
| Manufacturer | Seals & Orings |
|---|---|
| GasGas Part Code | MT280432047, replaces MT280332047, MT280232047/2 |
| EM Part Code | 0JT00-11014-01-00 |
| Vertigo Part Code | V-0662 |
| Year | 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
Write Your Own Review
We found other products you might like!
