RQ / Jitsie / Apico Tyre Beader
£24.95
8 in stock
Part Number
RQ_006008
Tyre seat beader to help with inflating the tyre, the beader fills the gap between the tyre and the rim and pops out as the tyre goes on to the rim.
One of the only ways of putting a tubeless rear tyre onto the rim without a compressor.
One of the only ways of putting a tubeless rear tyre onto the rim without a compressor.
Step by step guide:
- Mount your tyre on the wheel in the normal way, apply tyre soap to the tyre and rim, remove the valve core.
- Liberally brush tyre soap on one side of the tyre.
- Feed the beader into this side between the tyre and rim.
- Ease the beader into the gap with both hands. It will easily stretch to drop into position.
- Continue until the last few inches and push the last bit in if necessary.
- Seat beader evenly around the rim, not in the well. Use more tyre soap if necessary.
- Slowly inflate tyre and beader will pop out halfway
- Continue inflating steadily, easing the beader out if necessary
- When approx 6" left in, remove the beader before it's squashed and inflate until the bead pops out. Refit valve core.
| Manufacturer | RQF |
|---|
Write Your Own Review