All Balls - Linkage Bearing Kit - Sherco Trial ST 1999 to 2010
£89.95
2 in stock at our supplier (Ships in 1-3 days)
Part Number
AB27-1165
Complete linkage bearing kit from All Balls Racing designed for Sherco Trial ST 80-320 motorcycles from 1999 to 2010. Restores smooth rear suspension movement and improves overall handling.
Maintain your trials bike's handling and ride quality with this dedicated linkage bearing kit. Designed as a direct replacement for Sherco Trial ST models ranging from 80cc to 320cc (1999-2010), this kit provides the essential components needed to rebuild your rear suspension linkage and eliminate excess play.
- Product Type: Suspension Linkage Bearing Kit
- Compatible Make: Sherco
- Compatible Models: Trial ST 80 - 320
- Model Years: 1999 - 2010
Swing Arm Bearing Installation
- Before installing the needle bearings make sure the swing arm or linkage bearing bores are clean and free from burrs. It is also helpful to have the entire swing arm or linkage clean so that dirt does not get into the bearings.
- The needle bearings should be installed with a press and a tool that is just a bit smaller than the outer diameter of the needle bearing (a socket often works well for this). A vice may work if no press is available. Never use hammer blows to install the needle bearings. Hammer blows will damage the needle bearings.
NOTE: Heating the bearing bore of the swing arm or linkage will make bearing installation easier. - Once the bearings are installed, grease them excessively. The more grease the better.
- When installing the seals, grease the inner seal surface that contacts the mating parts. The grease on the seals helps lubricate the seal as well as making an additional barrier to dirt and water.
| Manufacturer | All Balls |
|---|---|
| Sherco Part Code | C151, C153, C168, C171, C169, C170 |
| Year | 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 |
Write Your Own Review
Related Products
