We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Bearing 6204-2RS C3 20x47x14
£9.85
3 in stock
Part Number
M6204 2RS C3
Deep Groove Ball Bearing 62041RS C3 20 x 47 x 14 6204U
Used By:
Supports the clutch shaft on all Sherco trials bikes, remove 1 seal, sealed side towards the clutch.
C3 Clearance
The Montesa Cota 315R also uses the same size bearing on the clutch shaft, the original bearing on the 315 has a machined step around the outside of the bearing which is used for the bearing retaining plate to clamp against, unfortunately the original bearing has been discontinued. To use this bearing as a replacement you will need to modify the retaining plates or the bearing.
Used By:
Supports the clutch shaft on all Sherco trials bikes, remove 1 seal, sealed side towards the clutch.
C3 Clearance
The Montesa Cota 315R also uses the same size bearing on the clutch shaft, the original bearing on the 315 has a machined step around the outside of the bearing which is used for the bearing retaining plate to clamp against, unfortunately the original bearing has been discontinued. To use this bearing as a replacement you will need to modify the retaining plates or the bearing.
| Manufacturer | Bearings |
|---|---|
| Sherco Part Code | M075 |
| Montesa / Honda Part | 91001-NN3-003 (replacement see note) |
| Year | 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| Model | 80, 125, 200, 250, 290, 300, 320 |
Write Your Own Review
We found other products you might like!
-
Sherco Clutch Shaft EV02£135.48 -
Washer M15 x 28 x 1£0.89 -
Washer M17 x 27 x 1£0.84 -
Washer M20 x 27 x 1£1.90
