Braktec Rear Brake Caliper - Billet CNC

Factory Braktec billet CNC machined rear brake caliper, for the ultimate rear brake.

Beautifully CNC machined body from high strength 7000 series aluminium alloy.

Improved design to increase stiffness in critical areas (see blue parts shown in the image).

Wedge shape at the rear of the caliper to help the rear wheel spacer slide into place and the edges of the calliper are radiused to make it easier to align the disc, plus the pads are held out of the way with magnet so no more messing about with screwdrivers trying to move the pads to get the rear wheel in place.

Weight reduction, 10% lighter than the standard cast rear brake caliper.

Screw in brake pad pin with circlip for double security.

New smaller M8 banjo bolt with integrated bleed valve, will require a new hose.

2 versions available to suit most trials bikes.
V1 fits the following bikes:
GasGas TXT Pro from 2002 to present
Sherco 250 & 290 - 2002 on
Sherco All Trials Models - 2005 on
Scorpa 2000 on
JotaGas / JGas 2012 on
Vertigo 2016 on
TRS 2016 on
Electric Motion 2014 on

V2 is the same except for the disc guard mounting spacing is wider (62mm) to suit the Montesa Cota 4rt trials bikes and the Montesa Cota 315R from 2001 to 2004

Comes complete with brake pads, banjo bolt and bleed nipple / cover. 
Uses an M8 banjo fitting.

Fits as a replacement to: 365029MO0, 223.00.115C, 223.00.105C, 223.00.140C, 223.00.101C, 223.00.105C