CSP SwapPegs Footrests
As low as
£169.99
In stock
%1 in stock
Part Number
TK-19**-**
Costa Special Parts: Ultra-Adjustable SwapPegs
Revolutionise your ride geometry. The CSP SwapPegs are the most versatile footpeg system on the market, engineered to give riders total control over their ergonomics while protecting their bike’s frame.
Key Features:
- The Swap System: Using a single footpeg body and interchangeable asymmetric pads, you can shift your stance across 8 unique positions (Uni model only). By swapping pads between the left and right sides, you can adjust the fore/aft position by up to 20mm and vary the height by 5mm.
- Precision Ergonomics:
- Pads 0-12: Choose between a standard or 12mm rearward position.
- Pads 4-8: Choose between a 4mm or 8mm rearward position.
- Available in LITE (one pad set) or PREMIUM (both pad sets) kits.
- Engineered Longevity:
- Pivot Bushing Design: Unlike standard pegs that pivot on the bolt, SwapPegs use a precision bushing clamped to the frame. This larger bearing surface eliminates friction and prevents the bolt from "hogging out" your frame holes.
- Anti-Droop System: Integrated screw and shim washers allow you to fine-tune the peg angle, ensuring a perfectly level stance even on older, worn frames.
- Premium Materials: Built for the harshest conditions with a high-grade AISI303 Stainless Steel base and Ergal 7075 T6 Aluminum pads.
- Serviceable Design: The top grip pads are fully replaceable, and the fixing screws are recessed inside the body to prevent damage, making refreshes quick and easy.
The "UNI Trial" Advantage:
The UNI version features an innovative two-position mounting bushing and frame-stop adjustment, allowing for even deeper customisation of height to suit your specific trials technique.
Note for TRS Riders: If your TRS uses a Ø 10mm pivot 2020 onwards TRRS One RR and Gold models, please ensure you purchase the optional special bolt to covert the Ø10mm bolt to Ø8mm (Code: TK-1974-UN) for a proper fit.
UNI Trial, universal fittment version fits the following trials bikes:
- Beta REV, EVO and SINCRO all models including Factory
- EM - ElectricMotion all models including EM5.7, E-Pure, Factor-e, Escape
- GasGas TXT all models until 2022 including Pro, Racing, Raga, Factory, GP
- JTG all models
- Montesa Cota all models including 315R, 4RT, 300RR, 301RR, 4Ride
- Ossa TR all models
- Scorpa SY250, SR, Twenty SC all models until 2022
- Sherco ST all models from 1999 to 2022
- TRS ONE, R, RR & Gold all models with Ø8mm pivot
- TRRS One RR and Gold 2020 onwards models require this special bolt to covert the Ø10mm bolt to Ø8mm
- Vertigo COMBAT / VERTICAL and NITRO all models
| Manufacturer | Costa Special Parts |
|---|
Write Your Own Review
We found other products you might like!
