Splat - Sachs Rear Shock Spring
These high-quality springs are designed specifically for Sachs rear trials shocks, ensuring a perfect fit.
Each batch undergoes rigorous testing post-manufacturing to guarantee the spring rate is within +/- 2.5% of the rated stiffness, significantly surpassing the British standard of +/- 10%.
Crafted from premium Chrome Silicon steel (54SiCr6), the springs are cold coiled using CNC machinery, then heat-treated and shot-peened to relieve residual stress. The ends are closed and ground flat. For durability and aesthetics, they are zinc phosphate coated for rust protection and epoxy powder coated in black.
Please refer to the table below to select the correct spring for your weight. This is a good starting point, but most riders could comfortably use one softer or one stiffer. Using a softer spring with more preload will provide a more lively response, while a stiffer spring with less preload will offer greater stability.
Riders of a very high standard (European/World Championship level) tackling massive steps and drops may prefer an even stiffer spring.
Design to fit the Sachs shock fitted to the Beta Evo 2015 to 2025
| Spring Stiffness | 60N/mm | 80N/mm | 90N/mm | 100N/mm |
| Rider Weight | 65 kg | 95 kg | 110 kg | 125 kg |
| Stones | 10.5 | 15 | 17.5 | 19.5 |
| Pounds | 145 lbs | 210 lbs | 240 lbs | 275 lbs |
Also fits:
Sherco with Sachs shock 2004 to 2005
Beta Evo with Sachs shock 2009 to 2014
GasGas TXT Pro with Sachs shock 2002 to 2014
this spring is 10mm shorter than the original spring fitted to these bikes, so it will only allow a few mm of preload, a pre load spacer is required to add more.
Approximate dimensions of these springs:
-
Inside diameter upper: 43mm
- Inside diameter lower: 48mm
-
Outside diameter: mm (ranges on stiffness)
-
Length: 131mm
| Manufacturer | Splat Products |
|---|---|
| Sherco Part Code | To Fit C268 |
| Beta Part Code | To fit 007330400 000, 007332400 000, 007333400 000 |