We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Sherco 4T Piston Kit 3.2
Part Number
RB_3.2PistonKit
Sherco 4 stroke Piston Kit 320cc
Comes supplied with new Piston Rings, Gudgeon Pin and Piston C-Clips
The pistons come in sizes A, B, & C. Size A is the smallest of the pistons and is usually what the bikes come with from the factory but not always, each letter size up increases the piston diameter by 0.01mm, the size is etched on to the top of the piston.
Comes supplied with new Piston Rings, Gudgeon Pin and Piston C-Clips
The pistons come in sizes A, B, & C. Size A is the smallest of the pistons and is usually what the bikes come with from the factory but not always, each letter size up increases the piston diameter by 0.01mm, the size is etched on to the top of the piston.
The factory recommended piston to cylinder tolerance for the 320 is 0.025 to 0.035mm, if you are considering putting the next size up piston in please be aware that your original piston will have worn down and any wear in the cylinder is unlikely to be uniform down the bore so please check the bore size all the way down the cylinder and from left to right as well as front to back, the factory measure the piston and cylinders at 24 degrees C. The piston is measured front to back, be aware that the pistons are manufacture tapered (larger at the bottom) and oval (larger front to back) to allow for unequal expansion of the piston in use.
Manufacturer | Sherco |
---|---|
Sherco Part Code | M664, M737, M738 |
Year | 2005, 2007, 2008, 2009 |
Model | 320 |
Write Your Own Review
We found other products you might like!
-
Sherco Cylinder Base Gaskets - 4T
Starting at £3.14