We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Stator Repair - Beta 99 to 02
£0.00
Out of stock
Part Number
USTRbetaRev3old
We no longer offer this service, to have your stator repaired, please contact Steve Hardaker of UK Motoplat - Bradford Ignitions
For more information please visit uk-motoplat.com
This stator plate is a common failure on the Beta Rev 3 leaving the bike with no spark. The repair stator should last much longer than the original due to the better quality wire used to rewind the coil and the repair comes guaranteed for 6 months.
This ignition suffers 2 main stator problems, one is the output source coil goes low in resistance you can check the resistance between the Brown and Red wires and it will show no reading or a very low reading, on a good stator it should be around 460 to 480 Ohms.
The other problem is that the black trigger modules pack in. Symptoms of this are the engine starts and revs but when put under load it just misfires and won't rev out.
For more information please visit uk-motoplat.com
This stator plate is a common failure on the Beta Rev 3 leaving the bike with no spark. The repair stator should last much longer than the original due to the better quality wire used to rewind the coil and the repair comes guaranteed for 6 months.
This ignition suffers 2 main stator problems, one is the output source coil goes low in resistance you can check the resistance between the Brown and Red wires and it will show no reading or a very low reading, on a good stator it should be around 460 to 480 Ohms.
The other problem is that the black trigger modules pack in. Symptoms of this are the engine starts and revs but when put under load it just misfires and won't rev out.
| Manufacturer | Beta |
|---|---|
| Beta Part Code | 31 03224, 31.03224, 31 03226, 31.03226 |
| Year | 1999, 2000, 2001, 2002 |
| Model | 125, 200, 250, 270 |
Write Your Own Review