Surflex GasGas Pro Clutch Friction Plates
£44.95
2 in stock
Part Number
SFC S2222B
Surflex pack contains 3 x fibre plates as fitted in the Gas Gas Pro bikes.
Fibre plates thickness ≈ 2.33mm, varies slightly.
Fibre plates thickness ≈ 2.33mm, varies slightly.
Due to GasGas pro clutch using a belleville spring you can alter the stiffness of the clutch lever pull by changing the thickness of the clutch pack, A thicker pack gives a stiffer lever and a more instant clutch response, good for expert riders doing big steps and launches. GasGas recommend 9.85mm max. A thinner pack makes the clutch easier to pull and a slightly softer delivery so good for clubman riders, but going too thin may lead to excessive clutch slip. GasGas recommend 9.75mm minimum. The steel clutch plates are available in 4 different thickness to allow you to get the thickness just right.
Manufacturer | Surflex |
---|---|
GasGas Part Code | MT280432055 |
Write Your Own Review
We found other products you might like!
-
DP GasGas Pro Clutch Steel Plates
Starting at £6.00