Reiger Rear Shock Smaller Bearing Spacer 24mm
£13.35
2 in stock
Part Number
1-13-00053
Top hat spacer to fit in the rose joint bearings of the Sherco and Vertigo rear suspension shock absorber, Reiger only.
Sold individually, 2 required per bearing.
These measure 6mm from outer edge to the face that presses up against the bearing.
Total width of 2 bushes when fitted to the bearing = 24mm (this is the correct width for the 1999 to 2011 Sherco trials bikes, plus the upper bearing up till 2015) (Vertigo upper bearing 2016 onwards).
To fit the smaller GE12-Wide bearing with a ID of 12mm (some Reiger shocks use a larger bearing and these need a different spacer).
Sold individually, 2 required per bearing.
These measure 6mm from outer edge to the face that presses up against the bearing.
Total width of 2 bushes when fitted to the bearing = 24mm (this is the correct width for the 1999 to 2011 Sherco trials bikes, plus the upper bearing up till 2015) (Vertigo upper bearing 2016 onwards).
To fit the smaller GE12-Wide bearing with a ID of 12mm (some Reiger shocks use a larger bearing and these need a different spacer).
Manufacturer | Reiger |
---|---|
Year | 2015, 2016, 2017, 2018 |
Model | 125, 200, 250, 280, 300 |
Write Your Own Review
We found other products you might like!