Montesa 315R Clutch Friction Plates
£28.70
1 in stock
Part Number
FP110-7
High-quality replacement clutch plates
7 x Friction Plates To Fit:
Honda CR250/500 87-89
Thickness: 3mm (the original Montesa Cota 315R friction plates are 2.72-2.88mm thick)
These plates will also fit the Montesa Cota 315R but they are at least 0.12mm thicker per plate so they are a minimum of 0.84mm thicker on the pack thickness, this is fine with the original steel plates but it can cause the clutch to rub on the outer cover plate, with the clutch lever fully pulled in, when used with the thicker aftermarket steel plates.
7 x Friction Plates To Fit:
Honda CR250/500 87-89
Thickness: 3mm (the original Montesa Cota 315R friction plates are 2.72-2.88mm thick)
These plates will also fit the Montesa Cota 315R but they are at least 0.12mm thicker per plate so they are a minimum of 0.84mm thicker on the pack thickness, this is fine with the original steel plates but it can cause the clutch to rub on the outer cover plate, with the clutch lever fully pulled in, when used with the thicker aftermarket steel plates.
Manufacturer | Apico |
---|---|
Manufacturer Part No | DA 04170-7 , FP111-7/FP110-7 |
Montesa / Honda Part | Replacement for 22201-NN1-000, 22201-NN3-800, 22201-MEL-000, 22321-MG3-000, 22201-KY2-000, 22201-KZ3-730, 22201-KA4-712 |
Year | 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 |
Model | 250 |
Write Your Own Review
We found other products you might like!