Montesa Steel Clutch Plates - Dimpled (6 Plates)

Replacement clutch plates to fit the Montesa Cota 4RT trials bikes.

These plates come with a dimpled surface finish to help lessen clutch stict and drag.

1.50mm thick (0.1mm thicker than standard)

These plates will also fit the Montesa Cota 315R but they are 0.1mm thicker per plate so 0.6mm thicker on the pack thickness, this is fine with the standard clutch plates but it can cause the clutch to rub on the outer cover plate, with the clutch lever fully pulled in, when used with the thicker aftermarket friction plates.