Sherco Water Pump Shaft 99 to 00
This shaft may be required if coolant is getting into the gearbox oil turning it into a white emulsion or oil or water is leaking from the check hole just under the water pump. The shaft can sometimes be worn in the seal contact areas hence the possible need for replacement.
The overall length of this shaft is 42.75mm, the threaded section is 12mm.
It's recommended to renew the seals and the bearings when replacing the shaft.
Fits Shercos from 1999 to 2000
Note to customers with a metal gear.
This is the 2nd design of water pump shaft, the original shaft used a brass gear which unfortunately won't fit this new shaft so the newer plastic gear may be required if this is the first time the shaft has been changed.
The original shaft and brass gear are no longer available.
|Sherco Part Code
|125, 200, 250, 290